AMD engineer confirms work on RDNA 3 5 and 6 nm GPUs
![AMD engineer confirms work on RDNA 3 5 and 6 nm GPUs AMD engineer confirms work on RDNA 3 5 and 6 nm GPUs](https://www.tomshw.it/images/images/2021/03/amd-radeon-rx-6700-xt-148776.large.jpg)
In the “section” Projects ”it is possible to see that the person in question worked on“ Navi31 (5nm, 6nm), Navi32 (5nm, 6nm), Navi33 (6nm)… [and] MI300 (6nm) “. The information suggests that both Navi 31 and Navi32 will be multi-chip-module (MCM) GPUs using a mix of fabrication nodes. Hence, Navi 31 and Navi32 are likely hybrid architecture GPUs. The Navi 33 GPU will likely have a monolithic design, with the single die manufactured at 6nm.
this why on some my previous twit
i said rdna3 will probably start with 5nm
amd pssst linkedin pic.twitter.com/ZfdfrvgwTO
- blue nugroho (@blueisviolet) February 4, 2022
if (jQuery ("# crm_srl-th_hardware_d_mh2_1"). is (": visible")) {console.log ("Edinet ADV adding zone: tag crm_srl-th_hardware_d_mh2_1 slot id: th_hardware_d_mh2"); } When Navi 3X GPUs are released, consumers will likely know them as the AMD Radeon RX 7000 series. Perhaps it is still too early to make any sensible predictions about the GPU configurations of these cards (cores, speed, memory, etc.), but rumors suggest that the Navi 3X chips will be a significant upgrade. Last, but not least for data centers and HPC, is to see confirmation of the arrival of the AMD Instinct MI300. Of course, the current top of the range Instinct, MI200, is already equipped with an MCM GPU and probably MI300 will be an evolution of the same, optimized and strengthened to compete against the best of NVIDIA and the new competitor Intel.
AMD confirmed that both RDNA 3 GPUs and Zen 4 CPUs would launch in 2022 in a presentation last summer, and various executives reiterated this timeline again this year.